ALL tables start off as high grade plywood. No particle board or OSB is used to construct any part of our tables.  Plywood is a superior choice in every category for table making. The ONLY advantage particle board has over plywood is price. Particle board is much cheaper, which is how you can have poker tables out in the market for much lower prices.


Most tables are made to standard sizes, but regardless if your table is a standard size or a custom size, it is individually hand crafted to your specifications.


Oval playing surfaces and rails are made with solid one piece construction, using high grade plywood. Particle board is susceptible to moisture/humidity and will weaken over a relatively short period of time. This is most evident on tables you see sagging in the middle or flexing/bending on the ends when they are leaned on. After many years of heavy poker, our tables will look and perform the same as they did on day one.


All tables are put together using ¼” T-Nuts and Furniture Bolts.
T-nuts are countersunk & glued into each element of the table providing a solid trouble-free thread insert to bolt everything together. No screws to strip out or components glued together that you can never take back apart.
If for some reason any portion of the table needs to come apart in the future, it can be unbolted and bolted back together worry free.
Furniture bolts are used because 1) they provide a wide low profile head that is tucked up out of the way of everything and 2) they are just plain look good.


ALL tables utilizing cup holders in the rail use a custom made ring to support the cup holder. This leaves the cup holder sitting on a solid surface which means after years of use there will be no sagging or compressing the cup holder into the foam.
ALL non-raised rail tables use jumbo cup holders. These cup holders will hold a can in a Koozie and are large & deep enough to prevent cans & bottles from being knocked over.
ALL raised rail tables have the option to use a dual stage cup holder for even more depth and versatility. These dual stage holders can be placed in a raised rail and be completely concealed within the table, leaving a clean professional finish.


ALL tables use 65lb HD 1” foam for the rails. All one piece, not pieced together. 1” thick foam rails give you comfort to sit at a table for hours on end. It is very durable, does not crush and gives ample support for years of use. There are cheaper alternatives, but with comfort being the #1 reason there is a foam rail, we wouldn’t use anything else.


ALL playing surface foam is ¼” Volara. Volara is a closed cell foam, meaning it will repel liquids. It is very durable and gives great feel to be able to both look at your cards & give plenty of support for chip stacks. Again, there are cheaper alternatives, but for play-ability and functionality this is the top choice.


Husker Poker Table Build. Check out this video on our YouTube page of a complete Husker Poker Table build in 3 minutes.


PplPoker.com Made in the USA